Navigation: Restorations > Current Restorations > Restoration Details
See the full details of this restoration
Make: Jaguar -E Type
Model: Special V12
Description: Aluminium hand built body to customers specifications
Front view
14/08/2007
Front view
14/08/2007
Side view
14/08/2007
Rear view
14/08/2007
V12 E type Engine
14/08/2007
Front scuttle area before panel fitting
16/08/2007
New scuttle panel in place with new door frame
16/08/2007
Newly fabricated inner door frame
16/08/2007
Newly fabricated inner door frame
16/08/2007
New door frame with skin cut out ready for shaping
16/08/2007
Inside view of the door skin now with shape
16/08/2007
Outside view of the door skin not fitted
16/08/2007
Door skin on fame
16/08/2007
Frame work for new boot floor
16/08/2007
Boot floor welded in place
16/08/2007
Boot opening frame, hinge assembly and inner beaver panel
16/08/2007
Inner boot frame and opening frame
16/08/2007
Boot frame in open position
16/08/2007
Boot skin pattern
16/08/2007
Boot skin cut out ready for shaping
16/08/2007
Boot skin with shape
16/08/2007
Boot lid and rear scuttle in place
19/10/2007
Beaver panel with timber buck
19/10/2007
Top guard panel before shaping
19/10/2007
Guard top in place
19/10/2007
Rear guard welded together
19/10/2007
Off side and Near side rear guards in place
19/10/2007
Guard panel before shaping
19/10/2007
Rear view with the guard panels tack welded and clamped in position
19/10/2007
Near side clamped in position
19/10/2007
Boot floor painted and ready for the boot gutter to be fitted after the back panel
24/10/2008
Boot floor painted and ready for the boot gutter to be fitted after the back panel
24/10/2008
Rear panel and guards waiting for fitting
24/10/2008
Guards and rear panel fitted into place
24/10/2008
Lower guards and rear quater panel being fitted into position
24/10/2008
The rear body work is fitted as a whole.
24/10/2008
The wheel arch being fitted after the rear body work, allows us to change the shape as the customer requires.
24/10/2008
The wheel arch in place with wire edge and rear bumper fitted to the rear body work.
24/10/2008
Rear guard painted in BRG
21/12/2009
Painted
21/12/2009
Painted
21/12/2009
Scuttle painted
21/12/2009
Painted
21/12/2009
Under tray painted
21/12/2009
Out of the spray booth
21/12/2009
Bonnet fitting
Rear guards and doors are finished
Rear guards and doors are finished
Rear guards and doors are finished
Bonnet ready for final fitting and paint
Rear undertray
Rear of car
Site Design & Coding By: Matthew Cobb